BGSYC - B-4469 PANTONE RUBBER BASE INK
- MSDS: BGSYC
- Manufacturer: A B DICK COMPANY
- Product Name: B-4469 PANTONE RUBBER BASE INK
- National Stock Number: 6850-00B010084
Product Identification
Product ID:B-4469 PANTONE RUBBER BASE INK
MSDS Date:07/23/1986
FSC:6850
NIIN:00B010084
MSDS Number: BGSYC
Responsible Party
CHICAGO, IL 60648
US
Emergency Phone: 312-647-8800
Info Phone: 312-647-8800
Preparer: KENNETH W. PINTER
Cage: 17638
Contractor
Telephone: 847-779-1900
Cage: 17638
Ingredients
PETROLEUM HYDROCARBON (SEVERLY HYDROTREATED)
CAS: 64742-46-7
Fraction By Weight: 7-12%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT MAY
LEAD TO IRRITATION AND DERMATITIS.
Explanation of Carcinogenicity:CONTAINS NO MATERIALS THAT ARE
CONSIDERED TO BE CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:ORAL INGESTION MAY CAUSE IRRITATION OR GASTRIC
DISTURBANCE. MAY BE SLIGHTLY IRRITATING UPON DIRECT EYE CONTACT.
MAY CAUSE IRRITATION AND DERMATITIS-DERMATITIS CHARACTERIZED BY
DRYNESS,CHAPPING AND RED DENING. OIL MISTS MAY CAUSE IRRITATION OF
THE THROAT AND LUNGS.
First Aid
First Aid:INGESTION-DO NOT INDUCE VOMITING. CONSULT A PHYSICIAN.
EYES-RINSE THOROUGHLY WITH WATER FOR 15 MIN. IF IRRITATION
PERSISTS,CONSULT A PHYSICIAN. SKIN-WASH WITH SOAP AND WATER. IF
IRRITATION PERSISTS, C ONSULT A PHYSICIAN. INHALATION-REMOVE TO
FRESH AIR. APPLY OXYGEN IF NEEDED. CONSULT A PHYSICIAN.
Fire Fighting
Extinguishing Media:FOAM,CO2,DRY CHEMICAL,WATER FOG.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE,BUT CAN BE USED TO
COOL CONTAINERS EXPOSED TO HEAT AND FLAME.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
BURNING.
Accidental Release
Spill Release Procedures:WIPE UP AND DISPOSE OF WITH SOLID WASTE.IF
SOLVENT WETTED WIPES WERE USED,DISPOSE OF IN APPROVED CONTAINERS.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE.KEEP CONTAINERS AWAY FROM EXCESSIVE HEAT,SPARKS AND OPEN FLAME.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:MECHANICAL VENTILATION ACCEPTABLE.
Protective Gloves:GLOVES SHOULD BE AVAILABLE-AVOID PROLONG
Eye Protection:SAFETY GOGGLES W/SIDE SHIELDS OR GOGGLES
Other Protective Equipment:GLASSES OR GOGGLES SHOULD BE USED WHEN
CLEANING PRESSES.
Work Hygienic Practices:WASH HANDS AND FACE WITH SOAP AND WATER BEFORE
EATING OR SMOKING.
Supplemental Safety and Health
FOR INDUSTRIAL USE ONLY.
Chemical Properties
Vapor Density:>1
Spec Gravity:1.02-1.11
Solubility in Water:INSOLUBLE
Appearance and Odor:INK VARNISH ODOR,PASTE.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO,CO2 AND SMOKE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:IN ACCORDANCE WITH LOCAL,STATE AND FEDERAL
REGULATIONS FOR NON-FLAMMABLE OILY WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.